Stagiaires post-doctoraux actuels

  • Gislaine Melega, août 2019 – mai 2020, « Integrated Cutting Stock and Lot Sizing Problems », co-supervisé avec Reinaldo Morabito et Silvio de Araujo.
  • Karim Perez, juin 2018 – juin 2020, « Logic based Benders for planning problems », co-supervisé avec Yossiri Adulyasak.

Anciens stagiaires post-doctoraux

  • Diego Fiorotto, avril 2016 – mars 2017, « Flexibility in lot sizing », co-supervisé avec Silvio de Araujo
  • Ioannis Fragkos, mars 2015 – août 2015, « Multi-period Fixed Charge Network Design », co- supervisé avec Jean-François Cordeau.
  • Duygu Tas, octobre 2014 – juillet 2015, « Lotsizing with stochastic setup times », co- supervisé avec Ola Jabali et Michel Gendreau.
  • Rami Afif As’Ad, février 2010 – juillet 2011, « Multi-level lotsizing and distribution problems », co- supervisé avec JF Cordeau.

Étudiants au doctorat actuels

  • Qihua Zhong, HEC Montréal, septembre 2019 – présent, co-supervisé avec Y. Adulyasak et M. Cousineau.
  • Mehdi Ghaniabadi, HEC Montréal, janvier 2019 – présent, co- supervisé avec Y. Adulyasak.
  • Matthieu Gruson, HEC Montréal, janvier 2016 – présent, « Multi-level production and distribution planning », co- supervisé avec J.-F. Cordeau.
  • Narges Sereshti, HEC Montréal, janvier 2016 – présent, « Stochastic lot sizing problems », co- supervisé avec Y. Adulyasak.
  • Masoud Chitsaz, HEC Montréal, septembre 2014 – présent, « Inbound and outbound production routing », co- supervisé avec J.-F. Cordeau.

Étudiants au doctorat diplômés

  • Mathijn Retel Helmrich, Faculty of Economics, Erasmus University, The Netherlands, janvier 2006 – octobre 2013, « Green Lotsizing », co- supervisé avec Albert Wagelmans et W. van den Heuvel.
  • Yossiri Adulyasak, HEC Montréal, septembre 2009 – décembre 2012, « Models and solution algorithms for production routing problems », co- supervisé avec J.-F. Cordeau.
Étudiants actuels (mémoire)

  • My-Phuong Ngo, juin 2019 – présent, « Stochastic production and transportation planning under carbon cap-and-trade system », co-supervision avec Jorge Mendoza.
  • Bofei Wang, avril 2019 – présent, « Modeling and simulation of resource sharing and equipment pooling », co-supervision avec Valérie Bélanger.
  • Chi Xu, mars 2017 – présent, « Lot sizing with storage location assignment ».

Étudiants diplômés (mémoire)

  • Sanae Belgarch, décembre 2017 – septembre 2019, « Production line balancing problems at 3PLs: development and analysis of new mathematical models », co-supervision avec Julie Paquette
  • Syed Araj Raza, en cours, février 2016 – octobre 2018, « Real options in global supply chains », co-supervision avec A. Van Assche.
  • Matthew Arsenault, mars 2016 – janvier 2018, « Lot sizing with lost sale and backlog ».
  • Zhao Li, avril 2015 – août 2017, « Improved formulations for a printing planning problem using symmetry breaking constraints ».
  • Mengyu Nie, février 2014 – février 2017, « How trade policy shocks affect global value chains », co-supervision avec A. Van Assche.
  • Nitin Ravishankar, avril 2015 – décembre 2016, « Analysis of inventory levels in Canadian companies », co-supervision avec C. Rebolledo.
  • Gabriel Doré, novembre 2015 – juin 2016, « Integration of 3D printing in the Canadian aerospace value chain », co-supervision avec J. Roy.
  • Ngoc-Thuy-Chau Nguyun, août 2014 – octobre 2015, « Interaction among costs in different lot sizing problems with substitution ».
  • Julian Martinez, avril 2014 – octobre 2015, « Application of network design at Suncor », co-supervision avec J.-F. Cordeau.
  • Qihua Zhong, juin 2013 – octobre 2014, « Two-level lot sizing with an emission constraint », co-supervision avec O. Jabali.
  • Luis Saucedo, février 2013 – octobre 2014, « Symmetry breaking for the Wagon Loading Problem ».

Étudiants actuels (projet supervisé)

  • Jing Guo, septembre 2019 – présent, co-supervisé avec Yossiri Adulyasak
  • Xiaoye Ma, septembre 2019 – présent.
  • Arsalaan Khan, septembre 2019 – présent, co-supervisé avec Jorge Mendoza.
  • Mohamed Al-Manssouri, avril 2019 – présent.
  • Ching-Jung (Doris) Liu, avril 2019 – présent.

Étudiants diplômés (projet supervisé)

  • Jitao Zhou, janvier 2019 – septembre 2019.
  • Elie El Kareh, mai 2018 – décembre 2018.
  • Linghan (Laura) Zhu, janvier 2018 – août 2018, co-supervision avec Y. Adulyasak.
  • Shilpa Rawat, septembre 2017 – mai 2018, co-supervision avec Y. Adulyasak.
  • David Sanchez Fernandez, avril 2017 – décembre 2017, co-supervision avec Y. Adulyasak.
  • Alex Delisle, avril 2017 – décembre 2017, co-supervision avec Y. Adulyasak.
  • Qichen Zhou, janvier 2017 – octobre 2017, co-supervision avec J. Paquette.
  • Simon Santerre, mai 2016 – décembre 2016.
  • Victor Lheritier, mai 2016 – décembre 2016, co-supervision avec S. Landry.
  • Alexandre Ouellet, mai 2015 – décembre 2015.
  • Lorraine Boulos, mai 2015 – décembre 2015, co-supervision avec H. Giroux.
  • Maximin Zengue, mai 2015 – décembre 2015.
  • Orianne Philippe, juin 2013 – décembre 2013.
  • William Beverly, juin 2013 – décembre 2013.

Professeurs

  • Silvio de Araujo, Universidade Estadual Paulista UNESP, Brésil, juillet 2019 – juillet 2020
  • Stefan Helber, Leibniz University Hannover, Allemagne, avril 2018 – septembre 2018.
  • Katja Schimmelpfeng, Hohenheim University, Allemagne, avril 2018 – septembre 2018.

Étudiants

  • Aldair Alvarez Diaz, septembre 2019 – novembre 2019, co-supervisé avec J.F. Cordeau; « Hybrid methods for inventory routing problems », étudiant Ph. D., Production Engineering Department, Federal University of Sao Carlos, Brésil, conseillers principaux : Prof. R. Morabito et Prof. P. Munari.
  • Konstantin Klein, avril 2019 – septembre 2019, « Stochastic lot sizing and transportation capacity selection », étudiant M. Sc., University of Hannover, Germany, superviseur : Prof. Stefan Helber.
  • Perla Berenice Mendoza Santos, mai 2018 – août 2018, co-supervisé avec J.F. Cordeau, « Symmetry breaking for graph coloring problems », étudiant M. Sc., ISAE/SUPAERO, Toulouse, France.
  • Mehdi Charles, avril 2018 – septembre 2018, co-supervisé avec J.F. Cordeau, « One-Warehouse Multi-Retailer Problem with Market Selection », étudiant M. Sc., ENSTA ParisTech, France.
  • Aldair Alvarez Diaz, novembre 2017 – octobre 2018, co-supervisé avec J.F. Cordeau; « Hybrid methods for inventory routing problems », étudiant Ph. D.,  Production Engineering Department, Federal University of Sao Carlos, Brésil, conseillers principaux : Prof. R. Morabito et Prof. P. Munari.
  • Mauricio Moz Christofoletti, novembre 2017 – février 2018, « The Integrated lot sizing and cutting stock problem applied to the mattress industry », étudiant M. Sc., Departamento de Engenharia de Produção, FEB, UNESP, Bauru, SP, Brésil, superviseur : Silvio de Araujo.
  • Karim Perez, mai 2016 – avril 2017, co-supervisé avec Y. Adulyasak, « Planning the molding process in molded pulp packaging industry », étudiant Ph. D.,  Universidade Federal de Sao Carlos, Brésil, conseillers principaux : Prof. R. Morabito et Prof. Eli Vitor Toso.
  • Pedro Luis Miranda Lugo, mai 2016 – avril 2017, co-supervisé avec J.F. Cordeau, « Mathematical models and solution methods for the integrated lot-scheduling and routing problem in the furniture industry », étudiant Ph. D., Universidade Federal de Sao Carlos, Brésil, conseillers principaux : Prof. R. Morabito et Prof. Deisemara Ferreira.
  • Fabio Neves Moreira, septembre 2015 – février 2016, « Solution methods for a large scale real life production routing problem », étudiant Ph. D., University of Porto, Portugal, superviseur : Bernardo Almada-Lobo.
  • Gislaine Melega, avril 2015 – janvier 2016, « Integrated lot sizing and cutting stock problems », étudiant Ph. D., Universidade Estadual Paulista UNESP, Brésil, superviseur : Silvio de Araujo.
  • Matthieu Gruson, avril 2015 – novembre 2015, co-supervisé avec Jean-François Cordeau, « Lot sizing with backlogging and service level constraints », étudiant M. Sc., ISAE/SUPAERO, Toulouse, France.
  • Nha Vo-Thanh, septembre 2014 – décembre 2014, « Mixed Integer Programming formulations for optimizing designs with one and two blocking factors », étudiant Ph. D., University of Antwerp, Belgique, superviseurs : P. Goos et E. Schoen.
  • Diego Fiorotto, octobre 2013 – septembre 2014, « Multi-machine lot sizing », étudiant Ph. D., Universidade Estadual Paulista UNESP, Brésil, superviseur : Silvio de Araujo.
  • Mirko Ruokokoski, août 2009 – février 2010, co-supervisé avec JF Cordeau, « The integrated lotsizing and vehicle routing problem », étudiant Ph. D., System Analysis Laboratory, Helsinki University of Technology.
  • Mathijn Retel Helmrich, mai 2009 – juillet 2009, « Production planning and scheduling problems with demand substitution and remanufacturing », étudiant Ph. D., Faculty of Economics, Erasmus University, Pays-Bas, superviseurs : Albert Wagelmans et Wilco van den Heuvel.
  • Hacer Goren Gunen, septembre 2008 – août 2009, « Meta-heuristics for capacitated lotsizing problems », étudiant Ph. D., Department of Industrial Engineering, Dokuz Eylul University, Izmir, Turquie, superviseur : S. Tunali.